permanent-magnet-variable-frequency-two-stage-energy-saving-air-compressor

Permanent magnet variable frequency single-stage screw air compressor

Compresseur d’air à aimant permanent à fréquence variable à deux étages et à économie d’énergie

IE4 Premium Efficiency（IE5 Optional）, Low-Noise, PM Motor(IP65), Dual VSD

	Puissance	15-450kW
	Débit d’air	0.5-76m³/min
	Pression maximale	4.5-12.5bar

Composants principaux+ Avantages du système

Moteur PM (IP55) haute efficacité IE4 (option IE5), faible bruit, compresseur bi-étage avec double variateur de vitesse

Turbine bi-étage à vis haute efficacité et basse vitesse
Principe de compression isotherme, rendement volumétrique supérieur, faible taux de compression
Moteur à aimant permanent haute efficacité IE4 offrant 98% de rendement avec 5% d’économie d’énergie par rapport aux moteurs VFD standard

Plage de vitesse étendue avec contrôle précis
Plage de vitesse réglable étendue (25%–100%) avec une précision de pression de ±0,5% pour un fonctionnement stable

Technologie Double Onduleur
Entraînement bi-fréquence intelligent maintient une sortie à température constante (±1°C) et pression stable (±0,1 bar)

Filtre principal personnalisé avec contrôle des pertes d’air
Faible perte de charge, haute efficacité, durée de vie prolongée

Système de roulements de marque SKF premium
Offre une durée de vie de plus de 50 000 heures avec une tolérance de vibration inférieure à 0,01 mm

Système de refroidissement surdimensionné
✓ Radiateur 30% plus grand avec revêtement nano-anticorrosion (test au brouillard salin >1000 heures)
✓ Grille anti-poussière à démontage rapide
✓ Dissipation thermique 15% supérieure à la moyenne du secteur

Séparation avancée huile-gaz
✓ Séparateur d’huile pliable de conception personnalisée
✓ Teneur en huile ≤3ppm dans l’air en sortie
✓ Durée de vie prolongée (jusqu’à 8000 heures)

Paramètres du produit

分页表格

SZ-20TPM~SZ-60TPM

New Model Maximum
     working pressure Capacity(FAD) Motor power Outlet
     pipe dia. Dimensions(mm) Weight

bar psig m³min cfm kw hp inch L w H kg

SZ-20TPM 4.5    65    1.0~3.9 35.3~137.7 15 20 G11/2 1550 980 1300 1000

5.5 80    0.9~3.5 31.8~123.6

6.5 94    0.8~3.2 28.2~113.0

7.5 109    0.7~3.0 24.7~105.9

8.5 123    0.7~2.9 24.7~102.4

10.5 152    0.6~2.4 21.2~84.7

12.5 181    0.5~2.0 17.7~70.6

SZ-25TPM 4.5    65    1.2~4.8 42.4~169.4 18.5 25 G11/2 1550 980 1300 1100

5.5 80    1.1~4.3 38.8~151.8

6.5 94    1.0~4.0 35.3~141.2

7.5 109    0.9~3.8 31.8~134.1

8.5 123    0.8~3.4 28.2~120.0

10.5 152    0.7~2.9 24.7~102.4

12.5 181    0.7~2.7 24.7~95.3

SZ-30TPM 4.5    65    1.6~6.4 56.5~225.9 22 30 G2 1700 1130 1430 1300

5.5 80    1.5~6.1 53.0~215.3

6.5 94    1.2~4.8 42.4~169.4 G11/2 1550 980 1300 1100

7.5 109    1.1~4.5 38.8~158.9

8.5 123    1.1~4.3 38.8~151.8

10.5 152    0.8~3.4 28.2~120.0

12.5 181    0.7~2.9 24.7~102.4

SZ-40TPM 4.5    65    2.1~8.8 74.1~310.7 30 40 G2 1700 1130 1430 1350

5.5 80    1.9~7.7 67.1~271.8

6.5 94    1.8~7.0 63.5~247.1

7.5 109    1.6~6.8 56.5~240.0

8.5 123    1.5~6.2 53.0~218.9

10.5 152    1.2~4.7 42.4~165.9 G11/2 1550 980 1300 1150

12.5 181    1.1~4.3 38.8~151.8

SZ-50TPM 4.5    65    2.6~10.3 91.8~363.6 37 50 G2 1850 1180 1430 1650

5.5 80    2.4~9.5 84.7~335.4

6.5 94    2.2~8.7 77.7~307.1 1700 1130 1430 1450

7.5 109    1.9~7.5 67.1~264.8

8.5 123    1.8~7.4 63.5~261.2

10.5 152    1.5~6.0 53.0~211.8

12.5 181    1.4~5.6 49.4~197.7

SZ-60TPM 4.5    65    3.3~13.1 116.5~462.4 45 60 G21/2 2250 1370 1700 2100

5.5 80    2.9~11.5 102.4~405.9

6.5 94    2.4~10.5 84.7~370.6 G2 1850    1180    1430    2000

7.5 109    2.3~10.0 81.2~353.0 1700 1130 1460 1700

8.5 123    2.2~8.6 77.7~303.6

10.5 152    1.9~7.5 67.1~264.8

12.5 181    1.6~6.4 56.5~225.9

SZ-75TPM~SZ-175TPM

New Model Maximum
     working pressure Capacity (FAD) Motor power Outlet
     pipe dia Dimensions(mm) Weight

bar psig m³/min cfm kw hp inch L w H kg

SZ-75TPM
     (W) 4.5    65    3.9~15.5 137.7~547.2 55 75 G21/2 2250
     (2300) 1370
     (1500) 1700
     (1750) 2200
     (2200)

5.5 80    3.4~14.5 120.0~511.9

6.5 94    3.2~13.3 113.0~469.5

7.5 109    3.0~13.1 105.9~462.4

8.5 123    2.8~12.3 98.8~434.2

10.5 152    2.3~10.1 81.2~356.5
     81.2~317.7 G2 1850
     (1800) 1180
     (1320) 1430
     (1370) 2000
     (2000)

12.5 181    2.3~9.0

SZ-100TPM
     (W) 4.5    65    4.2~20.7 148.3~730.7 75 100 DN65 2450
     (2750) 1670
     (1780) 1740
     (1950) 2600
     (3000)

5.5 80    4.8~19.0 169.4~670.7

6.5 94    4.5~17.5 158.9~617.8 DN65 2300
     (2300) 1670
     (1500) 1690
     (1750) 2400
     (2400)

7.5 109    4.2~16.6 148.3~586.0

8.5 123    3.8~15.6 134.1~550.7

10.5 152    3.4~13.6 120.0~480.1 G21/2 2250
     (2300) 1370
     (1500) 1700
     (1750) 2300
     (2400)

12.5 181    2.9~11.5 102.4~406.0

SZ-120TPM
     (W) 4.5    65    6.4~25.6 225.9~903.7 90 120 DN100 2900
     (2900) 1940
     (1940) 1950
     (1950) 4000
     (4000)

5.5 80    5.9~23.6 208.3~833.1 DN80 2750
     (2750) 1780
     (1780) 1950
     (1950) 3300
     (3700)

6.5 94    5.6~21.5 197.7~759.0

7.5 109    5.3~20.8 187.1~734.2

8.5 123    4.9~20.0 173.0~706.0

10.5 152    4.1~16.3 144.7~575.4 DN65 2300
     (2300) 1670
     (1500) 1690
     (1750) 2600
     (3200)

12.5 181    3.9~15.3 137.7~540.1

SZ-150TPM
     (W) 4.5    65    7.7~30.0 271.8~1059.0 110 150 DN100 2900
     (2900) 1940
     (1940) 1950
     (1950) 4100
     (3800)

5.5 80    7.2~28.2 254.2~995.5

6.5 94    6.7~26.6 236.5~939.0

7.5 109    6.1~24.5 215.3~864.9 DN80 2750
     (2750) 1780
     (1780) 1950
     (1950) 3800
     (3400)

8.5 123    5.8~23.5 204.7~829.6

10.5 152    5.1~20.1 180.0~709.5

12.5 181    4.4~17.3 155.3~610.7

SZ-160TPM
     (W) 4.5    65    8.8~35.0 310.6~1235.5 120 160 DN125 2930
     (3250) 1900
     (1950) 2060
     (2150) 4600
     (4600)

5.5 80    7.9~30.0 278.9~1059.0 DN100 2900
     (2900) 1940
     (1940) 1950
     (1950) 4200
     (3900)

6.5 94    7.2~28.2 254.2~995.5

7.5 109    6.5~26.0 229.5~917.8

8.5 123    6.1~24.8 215.3~875.4

10.5 152    5.6~22.9 197.7~808.4 DN80 2750
     (2750) 1780
     (1780) 1950
     (1950) 4000
     (3600)

12.5 181    4.7~19.2 165.9~677.8

SZ-175TPM
     (W) 4.5    65    9.6~38.3 338.9~1352.0 132 175 DN125 2930
     (3250) 1900
     (1950) 2060
     (2150) 4800
     (4800)

5.5 80    8.8~35.0 310.6~1235.5

6.5 94    7.8~33.0 275.3~1164.9

7.5 109    7.2~30.0 254.2~1059.0 DN100 2900
     (2900) 1940
     (1940) 1950
     (1950) 4300
     (4000)

8.5 123    6.9~28.0 243.6~988.4

10.5 152    6.1~24.1 215.3~850.7

12.5 181    5.4~21.3 190.6~751.9

SZ-200TPM~SZ-300TPM

New Model Maximum
     working pressure Capacity(FAD) Motor power Outlet
     pipe dia Dimensions(mm) Weight

bar psig m³min cfm kw hp inch L w H kg

SZ-200TPM
     (W) 4.5    65    10.5~42.0 370.7~1482.6 150 200 DN125 3250
     (3250) 1950
     (1950) 2150
     (2150) 5000
     (5500)

5.5 80    9.6~38.3 338.9~1352.0

6.5 94    8.8~35.0 310.6~1235.5

7.5 109    8.1~33.0 285.9~1164.9

8.5 123    7.4~30.0 261.2~1059.0 DN100 2900
     (2900) 1940
     (1940) 1950
     (1950) 4100
     (4300)

10.5 152    6.5~28.0 229.5~988.4

12.5 181    6.1~24.3 215.3~857.8

SZ-215TPM
     (W) 4.5    65    11.0~44.0 388.3~1553.2 160 215 DN125 3250
     (3250) 1950
     (1950) 2150
     (2150) 5000
     (5000)

5.5 80    10.5~42.0 370.7~1482.6

6.5 94    9.6~38.3 338.9~1352.0

7.5 109    8.8~35.0 310.6~1235.5

8.5 123    8.1~33.0 285.9~1164.9

10.5 152    7.7~30.0 271.8~1059.0 DN100 2900
     (2900) 1940
     (1940) 1950
     (1950) 4500
     (4100)

12.5 181    6.5~26.3 229.5~928.4

SZ-250TPM
     (W) 4.5    65    12.7~50.0 448.3~1765.0 185 250 DN125 3500
     (3500) 2250
     (2100) 2300
     (2400) 6200
     (6400)

5.5 80    11.5~46.0 406.0~1623.8 3250
     (3250) 1950
     (1950) 2150
     (2150) 5400
     (6200)

6.5 94    11.0~44.0 388.3~1553.2

7.5 109    10.7~42.0 377.7~1482.6

8.5 123    10.3~40.0 363.6~1412.0

10.5 152    8.8~35.5 310.6~1253.2

12.5 181    7.5~32.4 264.8~1143.7

SZ-270TPM
     (W) 4.5    65    13.7~55.0 483.6~1941.5 200 270 DN150 3800
     (3800) 2300
     (2300) 2400
     (2400) 7600
     (7300)

5.5 80    12.5~50.0 441.3~1765.0 DN125 3500
     (3500) 2250
     (2100) 2300
     (2400) 6200
     (6000)

6.5 94    11.5~46.0 406.0~1623.8

7.5 109    11.0~44.0 388.3~1553.2

8.5 123    10.5~42.0 370.7~1482.6

10.5 152    9.7~38.6 342.4~1362.6

12.5 181    8.2~33.0 289.5~1164.9

SZ-300TPM
     (W) 4.5    65    15.3~61.0 540.1~2153.3 220 300 DN150 3500
     (3800) 2100
     (2300) 2400
     (2400) 7800
     (7500)

5.5 80    13.7~55.0 483.6~1941.5

6.5 94    12.7~51.0 448.3~1800.3

7.5 109    12.4~49.6 437.7~1750.9 DN125 3500
     (3500) 2250
     (2100) 2300
     (2400) 6400
     (6200)

8.5 123    11.5~46.0 406.0~1623.8

10.5 152    10.3~41.2 363.6~1454.4

12.5 181    9.5~38.1 335.4~1344.9

SZ-340TPM~SZ-500TPM

New Model Maximum
     working pressure Capacity(FAD) Motor power Outlet
     pipe dia Dimensions(mm) Weight

bar psig m³min cfm kw hp inch L w H kg

SZ-340TPM
     (W) 4.5    65    16.3~65.0 575.4~2294.5 250 340 DN150 3800
     (3800) 2300
     (2300) 2400
     (2400) 8000
     (7300)

5.5 80    15.3~61.0 540.1~2153.3

6.5 94    15.0~60.0 529.5~2118.0

7.5 109    13.8~55.3 487.1~1952.1

8.5 123    13.3~51.0 469.4~1800.3

10.5 152    11.7~46.0 413.0~1623.8 DN125 3500
     (3500) 2250
     (2100) 2300
     (2400) 6600
     (6400)

12.5 181    10.3~41.2 363.6~1454.4

SZ-375TPM
     (W) 4.5    65    19.2~76.9 677.8~2714.6 280 375 DN200 4300
     (4000) 2400
     (2400) 2600
     (2650) 8800
     (8500)

5.5 80    17.8~71.0 628.3~2506.3 DN150 3800
     (3800) 2300
     (2300) 2400
     (2400) 8100
     (7800)

6.5 94    16.2~65.0 571.9~2294.5

7.5 109    15.1~60.5 533.0~2135.7

8.5 123    14.1~56.5 497.7~1994.5

10.5 152    12.8~51.0 451.8~1800.3

12.5 181    11.6~46.0 409.5~1623.8

SZ-400TPM
     (W) 4.5    65    20.6~82.5 727.2~2912.3 300 400 DN200 4300
     (4000) 2400
     (2400) 2600
     (2650) 9000
     (8700)

5.5 80    19.2~76.8 677.8~2711.0

6.5 94    17.7~70.9 624.8~2502.8 DN150 3800
     (3800) 2300
     (2300) 2400
     (2400) 8300
     (8000)

7.5 109    16.2~65.0 571.9~2294.5

8.5 123    15.0~60.3 529.5~2128.6

10.5 152    14.1~56.5 497.7~1994.5

12.5 181    12.8~51.5 451.8~1818.0

SZ-440TPM
     (W) 4.5    65    21.3~85.5 751.9~3018.2 330 440 DN200 4300
     (4000) 2400
     (2400) 2600
     (2650) 9300
     (8000)

5.5 80    20.6~82.4 727.2~2908.7

6.5 94    19.2~76.7 677.8~2707.5

7.5 109    17.7~70.7 624.8~2495.7 DN150 3800
     (3800) 2300
     (2300) 2400
     (2400) 8600
     (8300)

8.5 123    16.2~65.0 571.9~2294.5

10.5 152    15.0~60.2 529.5~2125.1

12.5 181    14.1~56.5 497.7~1994.5

SZ-475TPM 4.5    65    41.2~101.3 1454.4~3575.9 355 475 DN200 4600 2400 2650 12500

5.5 80    37.4~93.7 1320.2~3307.6

6.5 94    32.9~82.3 1161.4~2905.2 DN150 4000 2400 2650 11200

7.5 109    31.2~76.6 1101.4~2703.0

8.5 123    28.2~70.6 995.5~2492.2

10.5 152    26.3~65.8 928.4~2322.7 DN150 4000 2400 2500 10000

12.5 181    24.6~61.6 868.4~2174.5

SZ-500TPM - - 　　 375 500 - - 　 - -

5.5 80    41.0~101.1 1447.3~3568.8 DN200 4600 2400 2650 12900

6.5 94    37.4~93.5 1320.2~3300.5

7.5 109    32.9~82.2 1161.4~2901.7 DN150 4000 2400 2650 11600

8.5 123    31.2~76.5 1101.4~2700.5

10.5 152    28.1~70.3 991.9~2481.6 3800 2400 2500 10400

12.5 181    26.2~65.5 924.9~2312.2

Détails du produit

本地视频播放 - 等比例缩小

Nous contacter

SEIZE COMPRESSOR (Shanghai)Co.,Ltd.

Email: info@seize-air.com

Tel: +86 15001719145

WhatsApp: +86 15001719145

Addres: No. 188, Jinliu Road , Jinshan Industrial Zone, Jinshan District, Shanghai, China

Name

Email

Phone

Cooperation needs

Thanks for submitting!

We have received your message and will contact you as soon as possible.

New Model	Maximum working pressure		Capacity(FAD)		Motor power		Outlet pipe dia.	Dimensions(mm)			Weight
New Model	bar	psig	m³min	cfm	kw	hp	inch	L	w	H	kg
SZ-20TPM	4.5	65	1.0~3.9	35.3~137.7	15	20	G11/2	1550	980	1300	1000
	5.5	80	0.9~3.5	31.8~123.6
	6.5	94	0.8~3.2	28.2~113.0
	7.5	109	0.7~3.0	24.7~105.9
	8.5	123	0.7~2.9	24.7~102.4
	10.5	152	0.6~2.4	21.2~84.7
	12.5	181	0.5~2.0	17.7~70.6
SZ-25TPM	4.5	65	1.2~4.8	42.4~169.4	18.5	25	G11/2	1550	980	1300	1100
	5.5	80	1.1~4.3	38.8~151.8
	6.5	94	1.0~4.0	35.3~141.2
	7.5	109	0.9~3.8	31.8~134.1
	8.5	123	0.8~3.4	28.2~120.0
	10.5	152	0.7~2.9	24.7~102.4
	12.5	181	0.7~2.7	24.7~95.3
SZ-30TPM	4.5	65	1.6~6.4	56.5~225.9	22	30	G2	1700	1130	1430	1300
	5.5	80	1.5~6.1	53.0~215.3			G2	1700	1130	1430	1300
	6.5	94	1.2~4.8	42.4~169.4			G11/2	1550	980	1300	1100
	7.5	109	1.1~4.5	38.8~158.9
	8.5	123	1.1~4.3	38.8~151.8
	10.5	152	0.8~3.4	28.2~120.0
	12.5	181	0.7~2.9	24.7~102.4
SZ-40TPM	4.5	65	2.1~8.8	74.1~310.7	30	40	G2	1700	1130	1430	1350
	5.5	80	1.9~7.7	67.1~271.8
	6.5	94	1.8~7.0	63.5~247.1
	7.5	109	1.6~6.8	56.5~240.0
	8.5	123	1.5~6.2	53.0~218.9
	10.5	152	1.2~4.7	42.4~165.9			G11/2	1550	980	1300	1150
	12.5	181	1.1~4.3	38.8~151.8			G11/2	1550	980	1300	1150
SZ-50TPM	4.5	65	2.6~10.3	91.8~363.6	37	50	G2	1850	1180	1430	1650
	5.5	80	2.4~9.5	84.7~335.4				1850	1180	1430	1650
	6.5	94	2.2~8.7	77.7~307.1				1700	1130	1430	1450
	7.5	109	1.9~7.5	67.1~264.8
	8.5	123	1.8~7.4	63.5~261.2
	10.5	152	1.5~6.0	53.0~211.8
	12.5	181	1.4~5.6	49.4~197.7
SZ-60TPM	4.5	65	3.3~13.1	116.5~462.4	45	60	G21/2	2250	1370	1700	2100
	5.5	80	2.9~11.5	102.4~405.9			G21/2	2250	1370	1700	2100
	6.5	94	2.4~10.5	84.7~370.6			G2	1850	1180	1430	2000
	7.5	109	2.3~10.0	81.2~353.0				1700	1130	1460	1700
	8.5	123	2.2~8.6	77.7~303.6
	10.5	152	1.9~7.5	67.1~264.8
	12.5	181	1.6~6.4	56.5~225.9

New Model	Maximum working pressure		Capacity (FAD)		Motor power		Outlet pipe dia	Dimensions(mm)			Weight
New Model	bar	psig	m³/min	cfm	kw	hp	inch	L	w	H	kg
SZ-75TPM (W)	4.5	65	3.9~15.5	137.7~547.2	55	75	G21/2	2250 (2300)	1370 (1500)	1700 (1750)	2200 (2200)
	5.5	80	3.4~14.5	120.0~511.9
	6.5	94	3.2~13.3	113.0~469.5
	7.5	109	3.0~13.1	105.9~462.4
	8.5	123	2.8~12.3	98.8~434.2
	10.5	152	2.3~10.1	81.2~356.5 81.2~317.7			G2	1850 (1800)	1180 (1320)	1430 (1370)	2000 (2000)
	12.5	181	2.3~9.0	81.2~356.5 81.2~317.7			G2	1850 (1800)	1180 (1320)	1430 (1370)	2000 (2000)
SZ-100TPM (W)	4.5	65	4.2~20.7	148.3~730.7	75	100	DN65	2450 (2750)	1670 (1780)	1740 (1950)	2600 (3000)
	5.5	80	4.8~19.0	169.4~670.7			DN65	2450 (2750)	1670 (1780)	1740 (1950)	2600 (3000)
	6.5	94	4.5~17.5	158.9~617.8			DN65	2300 (2300)	1670 (1500)	1690 (1750)	2400 (2400)
	7.5	109	4.2~16.6	148.3~586.0
	8.5	123	3.8~15.6	134.1~550.7
	10.5	152	3.4~13.6	120.0~480.1			G21/2	2250 (2300)	1370 (1500)	1700 (1750)	2300 (2400)
	12.5	181	2.9~11.5	102.4~406.0			G21/2	2250 (2300)	1370 (1500)	1700 (1750)	2300 (2400)
SZ-120TPM (W)	4.5	65	6.4~25.6	225.9~903.7	90	120	DN100	2900 (2900)	1940 (1940)	1950 (1950)	4000 (4000)
	5.5	80	5.9~23.6	208.3~833.1			DN80	2750 (2750)	1780 (1780)	1950 (1950)	3300 (3700)
	6.5	94	5.6~21.5	197.7~759.0
	7.5	109	5.3~20.8	187.1~734.2
	8.5	123	4.9~20.0	173.0~706.0
	10.5	152	4.1~16.3	144.7~575.4			DN65	2300 (2300)	1670 (1500)	1690 (1750)	2600 (3200)
	12.5	181	3.9~15.3	137.7~540.1			DN65	2300 (2300)	1670 (1500)	1690 (1750)	2600 (3200)
SZ-150TPM (W)	4.5	65	7.7~30.0	271.8~1059.0	110	150	DN100	2900 (2900)	1940 (1940)	1950 (1950)	4100 (3800)
	5.5	80	7.2~28.2	254.2~995.5
	6.5	94	6.7~26.6	236.5~939.0
	7.5	109	6.1~24.5	215.3~864.9			DN80	2750 (2750)	1780 (1780)	1950 (1950)	3800 (3400)
	8.5	123	5.8~23.5	204.7~829.6
	10.5	152	5.1~20.1	180.0~709.5
	12.5	181	4.4~17.3	155.3~610.7
SZ-160TPM (W)	4.5	65	8.8~35.0	310.6~1235.5	120	160	DN125	2930 (3250)	1900 (1950)	2060 (2150)	4600 (4600)
	5.5	80	7.9~30.0	278.9~1059.0			DN100	2900 (2900)	1940 (1940)	1950 (1950)	4200 (3900)
	6.5	94	7.2~28.2	254.2~995.5
	7.5	109	6.5~26.0	229.5~917.8
	8.5	123	6.1~24.8	215.3~875.4
	10.5	152	5.6~22.9	197.7~808.4			DN80	2750 (2750)	1780 (1780)	1950 (1950)	4000 (3600)
	12.5	181	4.7~19.2	165.9~677.8			DN80	2750 (2750)	1780 (1780)	1950 (1950)	4000 (3600)
SZ-175TPM (W)	4.5	65	9.6~38.3	338.9~1352.0	132	175	DN125	2930 (3250)	1900 (1950)	2060 (2150)	4800 (4800)
	5.5	80	8.8~35.0	310.6~1235.5
	6.5	94	7.8~33.0	275.3~1164.9
	7.5	109	7.2~30.0	254.2~1059.0			DN100	2900 (2900)	1940 (1940)	1950 (1950)	4300 (4000)
	8.5	123	6.9~28.0	243.6~988.4
	10.5	152	6.1~24.1	215.3~850.7
	12.5	181	5.4~21.3	190.6~751.9